D Beddows
|
| posted on 10/9/10 at 11:34 PM |
|
|
FS 4AGE engines
As previously mentioned I have 2 of these...... really need the space back now and I really don't want to scrap them because they are awesome
little engines - both need a rebuild, but rebuild parts like pistons, bearings and gaskets are dirt cheap from US Ebay....... so...£30 for one
complete engine (minus auxiliaries) or £50 for the two if they go to a good home....you know it makes sense.... 
Collection only at this price from the Wigan (WN4) area
Cheers, Dave
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Bass1st
|
| posted on 11/9/10 at 12:48 PM |
|
|
What version of the 4age are they? 16v or 20v? small port or big port? cheers, Al
|
|
|
D Beddows
|
| posted on 11/9/10 at 03:56 PM |
|
|
They are both 16 valve phase 2 big port engines. Both originaly mk1 MR2 engines.
|
|
|
Bass1st
|
| posted on 12/9/10 at 12:45 AM |
|
|
Will the sump fit a small port engine do you know? I am about to buy just the sump & pick-up pick off a scappy for 60 quid so might be cheaper to
buy a whole engine!
|
|
|
D Beddows
|
| posted on 12/9/10 at 12:08 PM |
|
|
I'm pretty sure the phase 2 and 3 16 valve engines shared the same block (the phase 1 was different) so while not absolutely 100% certain I
would be very surprised if the sumps etc weren't interchangeable.
The only fly in the ointment is that you're not exactly just down the road..... but you could even have two complete engines for the price of a
sump and pickup pipe
|
|
|
Bass1st
|
| posted on 12/9/10 at 12:35 PM |
|
|
u2u sent
|
|
|
