Jasongray5
|
posted on 22/9/10 at 09:23 AM |
|
|
Where to get T-peices for cooling system
Morning Chaps,
Just wondering where I would go to get T-peices for my cooling system? Done a few searchs but no luck? Think they want to be around 32-19-32 and the
like.
Many thanks. Jason
How hard can it be?
http://www.flickr.com/photos/33261515@N03/sets/72157611049241239/
|
|
|
RazMan
|
posted on 22/9/10 at 09:26 AM |
|
|
CBS did mine to order - good job too.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
Macbeast
|
posted on 22/9/10 at 09:48 AM |
|
|
CBS again
I'm addicted to brake fluid, but I can stop anytime.
|
|
Bluemoon
|
posted on 22/9/10 at 10:15 AM |
|
|
Yorkshire plumbing fittings for locost..
|
|
shortie
|
posted on 22/9/10 at 11:05 AM |
|
|
I used some from pond supply shop IIRC, do loads of different sizes and cheap.
HTH,
Rich.
|
|
dhutch
|
posted on 22/9/10 at 11:52 AM |
|
|
Id go with CBS.
Cooling loops are going to be circa 100deg c and under pressure. I wouldnt want to be using pond fittings for that.
|
|
stevebubs
|
posted on 22/9/10 at 12:03 PM |
|
|
Allyfab will also do them to order
|
|
britishtrident
|
posted on 22/9/10 at 12:14 PM |
|
|
I got 32 equal tees from a fish pond hardware supplier used them for Rover thermostat conversions, stand up to the heat and pressure fine.
They also do 25 equal Tees.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
Gergely
|
posted on 22/9/10 at 01:13 PM |
|
|
I had a similar issue, searched and they were mostly too expensive solutions...
So I went to the scrapyard and bought a big bagful of different cooling tubes, different diametres, T-pieces, Y pieces, curved pieces... It all cost
me 10 pounds and it's perfect for the job...
Our build pictures
|
|
britishtrident
|
posted on 22/9/10 at 04:28 PM |
|
|
Scrapyard source Rover 75 has an unequal tee (ISTR 32x32x19) going into the bottom hose from the header tank. No longer available from Xpart Rover
as a new part.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|