Chaz
|
posted on 29/5/11 at 05:14 PM |
|
|
I would be amazed if anyone could sell me this!
Does anyone have one of these they can sell me?
It is the coupling from a mini r53 (cooper s) waterpump which couples to the supercharger.
All i need is the coupling! - that's it!
|
|
|
HowardB
|
posted on 29/5/11 at 05:28 PM |
|
|
can you get someone to make one?
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
Chaz
|
posted on 29/5/11 at 09:08 PM |
|
|
Its not a part that you can knock up out of any material and i would want it to be pretty much perfect, as the coupling has tolerances i dont want to
mess with
|
|
Benzine
|
posted on 29/5/11 at 09:13 PM |
|
|
Tried contacting any of these to see if they have them?
★ MINI R53/r52 2005 BREAKING ★ COOPER S JCW ONE DAMAGED | eBay UK
BREAKING BMW MINI COOPER S R52/R53 | eBay UK
★ MINI R53/r52 2005 BREAKING ★ COOPER S JCW ONE DAMAGED | eBay UK
|
|
tul214
|
posted on 29/5/11 at 09:28 PM |
|
|
Ask on MiniTorque
Lots of knowledgeable people on there.
1.6 Raw Super6 sold
|
|
Chaz
|
posted on 2/6/11 at 06:04 PM |
|
|
BUMP
This coupling is also on the rear end of anyone with a mini eaton 45 supercharger
If anyone has one of these superchargers and is not using the coupling then would you mind selling it to me!?
Thanks.
|
|
Yazza54
|
posted on 2/6/11 at 07:04 PM |
|
|
It's unlikely that someone is going to deem a waterpump or supercharger they could sell on useless so you can have the coupling.
May have to bite the bullet and buy a used pump and remove it.
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
mikemph
|
posted on 2/6/11 at 07:29 PM |
|
|
Lucky for you I have a 1380 supercharged classic mini
If I can get it to come off the SC easy without too much hassle
PS this was also built the locost way.... manifolds brackets etc all made myself running injection and MS2
[Edited on 2/6/2011 by mikemph]
|
|
Chaz
|
posted on 3/6/11 at 07:20 AM |
|
|
Excellent - mike you have u2u
|
|