jacko
|
| posted on 1/4/13 at 06:15 PM |
|
|
Is it a 3 wheeler or 4 ? haha
http://anarchadia.blogspot.co.uk/2012/08/vintage-thing-no117-skr-imp-powered.html
One for them that like odd vehicles
Jacko
|
|
|
|
|
emlyno
|
| posted on 1/4/13 at 06:49 PM |
|
|
If the 2 (rear) wheel centres are within a certain distance apart they are deemed to be a single wheel. Check out Owen Greenwood's mini from the
60's. It was very successful until banned!
|
|
|
scootz
|
| posted on 1/4/13 at 09:35 PM |
|
|
Without getting my ruler out, that would be classed as a trike.
It's Evolution Baby!
|
|
|
matt_gsxr
|
| posted on 1/4/13 at 11:05 PM |
|
|
So if you did the same trick at the front and the back could you make a 4 wheeled "bike"?
Or can you only use the trick at one end?
|
|
|
SteveWalker
|
| posted on 1/4/13 at 11:13 PM |
|
|
I know that having the two wheels close enough together means that it is legally classed as a trike, but am I right in remembering that a 2CV based
kit, with both rear suspension arms swapped over brings the wheels close enough together?
|
|
|
scootz
|
| posted on 1/4/13 at 11:58 PM |
|
|
The tread centres of the twinned-wheels must be less than 46cm apart.
It's Evolution Baby!
|
|
|
Uphill Racer
|
| posted on 12/5/13 at 12:17 AM |
|
|
A 2 speed 3 wheeler................Didn't Morgan move on from that about 80yrs ago............
|
|
|
Peteff
|
| posted on 12/5/13 at 07:38 AM |
|
|
There are 3 wheeled scooters available like the Piaggio mp3. They look weird at first but when you see one running round they make sense.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
