robbydee
|
| posted on 6/10/08 at 07:58 PM |
|
|
r1 carb swaped for r1 throttle bodies?
As i already have a manifold will i be able to use it?
Any advice on r1 throttle bodies.?
currently have pinto with r1 carbs..and megajolt.
|
|
|
|
|
lsdweb
|
| posted on 6/10/08 at 08:11 PM |
|
|
The spacing is slightly different!
|
|
|
robbydee
|
| posted on 6/10/08 at 08:13 PM |
|
|
typical..
|
|
|
omega0684
|
| posted on 6/10/08 at 08:28 PM |
|
|
you can use the same manifold, i did, they are only of by a couple of mm, you can only see the difference on one cylinder.
|
|
|
robbydee
|
| posted on 6/10/08 at 08:33 PM |
|
|
quote:
Originally posted by omega0684
you can use the same manifold, i did, they are only of by a couple of mm, you can only see the difference on one cylinder.
what else did you need to do the conversion..
im thinking..
megasuirt
fuel pump
swirl pot and return to tank.
sensors etc.
lambda.
|
|
|
lsdweb
|
| posted on 6/10/08 at 08:34 PM |
|
|
I fitted TB's to a carbed R1 and it was OK but they were a bu**er to fit and wouldn't stay on for long!
|
|
|
