Amidst all the gloom and doom of the events of last week, though it would be good to lighten the mood, to that end, as we move on with development of next years cars, we have two brand new Arion S2 kits surplus to requirements which we have on offer at £7000 plus vat - its a fairly comprehensive kit of parts and a saving of £800 plus vat over rrp.
Full details are available on our facebook page at-

https://www.facebook.com/abperformanceltd/

Hope that works as I.T isn't my thing

We have clocked up over 460 race and test hours on the S2 Arions now with the only failures being a 5mm rose joint on a gear change and a clutch cable.
Higgo's works car has competed in 16 races, clocking up 16 class poles, 15 fastest laps and 15 wins, setting 9 new lap records along the way.

So if track work is your thing this might be right up your street.
I would put up some pictures of the Arions from our archive but don't have a clue how to do it without risking filling the whole page

regards to all

Andy

quote:

---

Originally posted by Andy B

I would put up some pictures of the Arions from our archive but don't have a clue how to do it without risking filling the whole page



Andy

---

Description

S2 front end

Description

Description

Andy

What would a complete body/splitter etc (enough to mount a body on a Striker/Phoenix) come in at?

If only I had the funds Andy

The first and third pictures are Sabre not Arion

Hi Jeff
Complete Body set up including front clip. rear clip, sidepods and blades, rear spoiler, front floor (includes splitter) front floor frame, pair of headlamp covers and a pair of screens comes out at £2140 plus vat retails. Could do it for £2000 plus vat for the complete set up to which you would need to add a sheet of alloy to fabricate car specific floor sections and sidepod tops.
Let me know if you need more info fella
Thanks also to HKP57 for the pictures although as Adi has said a couple are Sabre not Arion
Best regards
Andy

Cheers Andy, I'll come back to you.

quote:

---

Originally posted by jeffw
Cheers Andy, I'll come back to you.

---

Steve at Fury offered me the option of having the front hinged but I wasn't keen as it's so light I could see it getting pulled off by a strong breeze.. Probably just me over thinking it though..

He done a super job of fitting the body.. very pleased with it!

quote:

---

Originally posted by peter030371

quote:

---

Originally posted by jeffw
Cheers Andy, I'll come back to you.

---

only £250 more than a new set of body work from RAW......will your zetec lump fit under the bonnet of the S2? Fury have experience of fitting this body work but would they be able to come up with a hinge for the bonnet?

---

quote:

---

Raw are offering to make me a Carbon bonnet. I'm not sure the S2 bonnet will fit over the zetec and all the rads/intercoolers in the nose plus there is the large 'hump' for the BEC airbox which I don't need. It is smart bodywork though and much more Aero than the Phoenix. Questions, Questions.

---

I think we are going a "little" off topic, Andy is trying to sell some lovely Arion S2 race cars !

If I had room I'd have it! Just bought a focus RS

[Edited on 1/7/16 by Sadsy]