i have put a few post on here about the trouble i am haveing with pinto
is there anyone willing to come to scunthorpe and have a look at it for me i will pay of course dont know what else to do
i like these vague questions
whats actually wrong with it?
i work in scunthorpe might be able to add my expertise if u give a brief description of whats wrong with it Rick
HI to start with what cam shaft have you got ?
To set it up right we need to know this
as a example a piper 255 mild road is 113 at full lift
a 285 ultimate road is 108 % full lift
I don't know how mutch you have spent so far but for about £80 you could have it at Bogg Brothers on there rolling road
some one on here may know the right price
Graham
all i can get out of the guy who fitted it is that it is a genuine ford fast road cam and he did a stage 2 head i got a brand new 32/36 carb for him to fit with it and all he says it is that .the car will run but wont rev proply its been to 3 garages know and they cant sort it hense the ask for help
Are you using a dizzy or megajolt?
has the timing been checked and the cam belt fitted right
i am just thinking what it could be apart from the carb
have you set the valve clearances correctly they are normally a different setting to the standard due to overlap
all i can say is that the garage who did the work say they have and i would not know where to start
Hi Rosey1
i live 4 miles north east of scunthorpe, i could call and see you if you like and see what i can do. Although my work is mainly developing and
modifying cylinder heads i have used several of these engines myself in the past several years.At the moment i am not at home, but will be back in
scunthorpe area next week.
Neil Collingwood
thanks mate anything you can do will help me the garage has now said he is getting solicitor on to me know fow ringing him to find out what he has done to engine
i will contact you when i get home and see what there is to do.
Neil
Hi your carb is a 32/36 dgv ? dose it have a manual choke ?
If so can you drive the car and pull the choke to see if it revs / pulls better if so the jets must be to small
what do other people think to this