HI all hope you are well
bit of a problem looking for advice
I have a 2lt pinto engine
going to fit the pipes from the bottle to the thermostat
the bottom pipe from the bottle to the pump
the top pipe to I DONT HAVE A SECOND PIPE ON THE THERMOSTAT
should i have? or where do i feed it to

You using Polo rad? If so I can pop out and have a look for you.

yes i am great thanks

Sorry wife's been flogging me all day with those 'just' jobs. Will have. Look after work tomorrow and get back to you

Okay. Hope this makes sense;
From the thermostat, thick pipe to the top of the rad. Thin pipe to a T piece that goes into the expansion bottle.
From the water pump, thick pipe to bottom of rad. Thinner pipe to bottom of expansion tank.
Then thin pipe from top of rad to other side of T piece into expansion tank.
Sorry for the delay in answering.
Let me know how you get on

BRILL BRILL BRILL MANY THANKS THAT IS WHAT I NEED GREAT WILL SO THAT THIS WEEK
thanks again for the help