Board logo

ZX9R E Engine Coolant/Oil Sensors?
Cadburys Man - 25/1/14 at 02:25 PM

Does anyone know where the oil and coolant sensors are on the ZX9R E engine and are they 1/8 NPT thread?

Daz.

40inches - 25/1/14 at 05:36 PM

If it's the same as the C, the oil pressure sensor is to the left of the oil filter, and the water temp is on the block behind the carbs.
You dabbling in the Dark Arts Daz?
I fitted 1/8 npt sensors, sealed ok.

[Edited on 25-1-14 by 40inches]

Cadburys Man - 25/1/14 at 09:13 PM

quote:
Originally posted by 40inches
If it's the same as the C, the oil pressure sensor is to the left of the oil filter, and the water temp is on the block behind the carbs.
You dabbling in the Dark Arts Daz?
I fitted 1/8 npt sensors, sealed ok.

[Edited on 25-1-14 by 40inches]


Cheers Dave I was just wondering cos i've ordered my new speedo today and was inquiring to see if the coolant sensor will be able to be connected straight to the engine
Deffo not dabbling to deeply Dave, i'll leave that to the Professionals aka Dave LOL )

p.s. if i order another sensor would it easily fit to the engine to pick up the oil temp??