jay taylor
|
| posted on 17/8/07 at 08:14 PM |
|
|
sierra plenum mod
Hi all
i have spoken to someone on here before about the modification of the 2l sierra dohc plenum and they gave me a pdf on how to do this
but i seem to have miss placed it if anyone can help me with this it will be greatly appreciated
kind regards
jay
|
|
|
|
|
zilspeed
|
| posted on 17/8/07 at 08:35 PM |
|
|
Mark Allanson's Photo Archive will give you what you need. 
For example
 
Description
[Edited on 17/8/07 by zilspeed]
|
|
|
t.j.
|
| posted on 17/8/07 at 08:44 PM |
|
|
I'm planning to cut in half , then turn it upsite down.
So the trottle will at the bell-housing.
And no bulge in the bonnet.
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
|
jollygreengiant
|
| posted on 17/8/07 at 09:02 PM |
|
|
If you are talking about the 2l Pinto then you will also find photo's in my archive.
How ever, in your post you say it is a 2l DOHC so my work would not apply (nor any of the previous posts)
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
Mark Allanson
|
| posted on 17/8/07 at 09:08 PM |
|
|
is this what you were looking for?
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
scotty g
|
| posted on 18/8/07 at 06:40 AM |
|
|
like this
 
Rescued attachment 100_0755.JPG
|
|
|
jay taylor
|
| posted on 19/8/07 at 06:57 PM |
|
|
scotty g
That is the one I think it was you who emailed me.
|
|
|
