spdpug98
|
| posted on 3/3/09 at 07:34 PM |
|
|
Front width Vortx +
Been trying to get the measurments so I can set up the front rose joints/suspension arms.
Can anyone with a Vortx+ let me know what the width is at the front from 'outside tyre edge' to 'outside tyre edge'.
I know I have it too short at the moment due to the constant 'toeout' and the rose joints are fully in (inboard)
Hope this makes sense
My Blog: http://spdpug98.wordpress.com/
|
|
|
|
|
richardh
|
| posted on 3/3/09 at 08:43 PM |
|
|
mine was 7ft plus a natts cock - it didnt fit on my mates trailer
got it on by lifting and chocking with wood etc.
should have seen me travel 300 miles back like it with ratchet straps holding it on........ 15 inch wheels on mine
|
|
|
Jubal
|
| posted on 3/3/09 at 09:48 PM |
|
|
7ft wide???? Are you sure? Do you mean 6ft?
|
|
|
Krismc
|
| posted on 6/3/09 at 05:43 PM |
|
|
mines about 5, 11" ita a rt plus inboard
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
spdpug98
|
| posted on 6/3/09 at 06:14 PM |
|
|
Thanks for the replies, Marc has now given me the actual dimensions of the arms from the inner to outboard rose joints
So all set up now just need to sort the toe out/in
My Blog: http://spdpug98.wordpress.com/
|
|
|
