CNHSS1
|
posted on 5/1/11 at 12:16 PM |
|
|
CAD drawing of MX5 uprights?
has anyone got a DWG or DXF drawing of an MX5 front upright and possibly hub?
or at worst a detailed pdf?
need anlges KPi, dims, and ideally balljoint tapers
Cheers me dears
CNH
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
m8kwr
|
posted on 5/1/11 at 12:36 PM |
|
|
Link
HTH
[Edited on 5/1/11 by m8kwr]
|
|
CNHSS1
|
posted on 5/1/11 at 12:46 PM |
|
|
think im being a bit 'tick (happens a lot...) but whats a STEP file? i need it in DXF or DWG format, can they be converted?
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
m8kwr
|
posted on 5/1/11 at 12:57 PM |
|
|
If you U2U me your email address and let me know what you need converting I can do it for you.
|
|
CNHSS1
|
posted on 5/1/11 at 01:12 PM |
|
|
cheers you have u2u
ideally DXF if poss, if not DWG and i can use a converter here
Ta
CNH
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
CNHSS1
|
posted on 5/1/11 at 02:05 PM |
|
|
big thankyou to m8kwr for his help, much appreciated
CNH
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|