Rocket_Rabbit
|
posted on 29/4/11 at 11:39 AM |
|
|
Just before I buy...
There are a couple of Mac#1 Worx cars I have my eye on. I have pretty much made up my mind to actually get a Worx over all the other kits
If some of you would be so kind as to answer some questions:
1) Self centering - Is this a problem compared with other kits such as the MK which seems to suffer from it a lot?
2) Anti-Roll Bars - must be possible to fit these, but has anyone done it?
3) Inverted Gaz Shocks - read about them going a bit duff even though they have been re-valved. Any experiences?
4) Top Speed - I believe, with 13" wheels and a 3.21 freelander diff, you are looking at just over 130mph. Correct?
5) Steering rack - On the worx, does it come with a quick rack or merely a shortened Sierra rack?
6) Diff - Obviously the Freelander diff is open. Has anyone any experiences of an LSD fitted and whether it makes much improvement?
TIA
|
|
|
jossey
|
posted on 29/4/11 at 11:47 AM |
|
|
chekc this guy out he knows about the anti roll bars.
http://locostbuilders.co.uk/viewthread.php?tid=154460
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
procomp
|
posted on 29/4/11 at 12:04 PM |
|
|
Hi
1. self centering is the same as an indy. It depends on how the individual car/ chassis came out of the jigs with the combination of wishbones
currently fitted to the chassis.
2. Anti rollbars are available as custom made items from various suppliers and a few forum members.
3. Inverted dampers are a joke. They are NOT valved differently and anyone who thinks that valving them differently will make them work upside down is
talking crap. The seals that are fitted simply are not good enough to do the job in that application and let air in which ends up where the adjuster
is and results in NO DAMPING. Every Mac1 i have setup that has had them inverted has been the same. Simply bleed them out and refill with oil and fit
them the correct way up. Or spend some serious money and get a set that will work in that application.
4. 5. 6. ill let some one with direct experience of the freelander set up comment on.
But yes the mac#1 is a better choice over the Indy as it has made some developments where the indy has not.
Cheers Matt
|
|
Mark Allanson
|
posted on 29/4/11 at 01:31 PM |
|
|
I thought the idea of a jig was that all individual cars/chassis came out identical?
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
jollygreengiant
|
posted on 29/4/11 at 03:56 PM |
|
|
The speed that your vehicle will reach is entirely dependent on :-
A, The max RPM that your power plant will produce
B, The power and torque that your power plant will produce at peak RPM
C, How brave you are at full Throttle
D, to a degree the size of tyres fitted as these also effect the gearing
E, How stable your vehicle will be at its top (theoretical) speed.
a 1.0l engine producing 80bhp at 10000rpm would be unlikely to get to 132mph, however, a 2.0l engine producing 200bhp at 10000 should get to 132mph.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
jollygreengiant
|
posted on 29/4/11 at 03:57 PM |
|
|
quote: Originally posted by Mark Allanson
I thought the idea of a jig was that all individual cars/chassis came out identical?
I thought a jig was what HRH William, the Duke of Cambridge might be getting tonight.![](/images//smilies/shocked.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif)
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
Mark Allanson
|
posted on 29/4/11 at 04:23 PM |
|
|
quote: Originally posted by jollygreengiant
quote: Originally posted by Mark Allanson
I thought the idea of a jig was that all individual cars/chassis came out identical?
I thought a jig was what HRH William, the Duke of Cambridge might be getting tonight.![](/images//smilies/shocked.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif)
Hence the phrase 'I'm jiggered'
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
Rocket_Rabbit
|
posted on 29/4/11 at 07:14 PM |
|
|
quote: Originally posted by jollygreengiant
The speed that your vehicle will reach is entirely dependent on :-
A, The max RPM that your power plant will produce
B, The power and torque that your power plant will produce at peak RPM
C, How brave you are at full Throttle
D, to a degree the size of tyres fitted as these also effect the gearing
E, How stable your vehicle will be at its top (theoretical) speed.
a 1.0l engine producing 80bhp at 10000rpm would be unlikely to get to 132mph, however, a 2.0l engine producing 200bhp at 10000 should get to 132mph.
Well, since a MAC#1 Worx has a ZX10R, gearing and RPM are known. Like I also said, 13" wheels and 3.21 diff.
I don't know the gearing on ZX10R's, so I was hoping someone could chime in.
BTW, you are incorrect with your bhp statement - 80bhp could reach 132mph because top speed is very much aerodynamically limited since drag increases
at the square of speed.
Rest assured, the power the ZX10R has will be enough to propel the MAC to 130+, but the limiting factor will be the gearing.
[Edited on 29/4/11 by Rocket_Rabbit]
|
|
john77cars
|
posted on 29/4/11 at 07:54 PM |
|
|
my mac#1 zx10r will do 125mph flat out,thats with the freelander diff,but its not top speed you need,its how fast it will go round the corners,check
my video.the white escort cosworth in front had 500bhp,hoppe this helps
http://youtu.be/IcmJNOk35Pc
|
|