hearntd
|
| posted on 26/5/14 at 10:30 AM |
|
|
Another Garage Clear out... Pinto
So I finally decided I was fed up with tripping over my old Pinto and a few other bits in the garage so time to get rid, the list of items I have and
a couple of pics below.
1, 2.0 205 block Pinto, this is a complete engine (came out running) it has the following with it:
Twin Webber 45's, throttle linkage and cables.
FR32 fast road cam with vernier pulley.
Bestek electronic ignition kit.
Shortened and Baffled sump
Alternator
Starter
and cooling hoses.
Currently has tiger engine mounts.
The engine was Rolling roaded before I fitted the new head and cam @120BHP and 133lbs/ft.
2, Type 9 5 speed gearbox with Pinto bell-housing, this was with this engine, never had any problems with it.
3, I have the Pinto headers form tiger (no picture).
4, RWD Type 9 to Duratec bell-housing, this is the cable or hydraulic one, it has both the cable arm with a modified release bearing for raceline
clutch cover etc. and also a hydraulic slave cylinder with hoses. I am not sure if slave cylinder is OK but I'm throwing it in anyway.
5, Duratec engine mounts, I'm not sure what car they are for but I think Westfield...
I'm open to sensible offers on any of this. Oh and I'm in Hampton Middx.
1, [img]https://lh5.googleusercontent.com/vPcZXVfGRRCZwjkKhFf5iFewYUCy7g_7J6c_W8gkft9a=w334-h187-p-no[/img]
2, [img]https://lh6.googleusercontent.com/dLrpe_B8DprNdA67vEW9yYlzH35GhwpdRb2XqwepPpLc=w403-h226-p-no[/img]
4, [img]https://lh4.googleusercontent.com/VaFsWl15FRZr86G0M9GauYvBg1TdIcp1n57Vzq8Wzy3d=w116-h207-p-no[/img]
5, [img]https://lh6.googleusercontent.com/C07_OY831wHZYW-SniffwElWR7jFawf8C0BRVHNz_PDl=w116-h207-p-no[/img]
[Edited on 26-5-14 by hearntd]
[Edited on 26-5-14 by hearntd]
[Edited on 26-5-14 by hearntd]
[Edited on 27-5-14 by hearntd]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
sjmatthews
|
| posted on 26/5/14 at 02:37 PM |
|
|
Surely that's 120 BHP?
I'll be in the garage dear!
|
|
|
hearntd
|
| posted on 26/5/14 at 04:34 PM |
|
|
quote:
Originally posted by sjmatthews
Surely that's 120 BHP?
Ooops Sausage fingers  I've updated it now 
|
|
|
samjc
|
| posted on 26/5/14 at 06:50 PM |
|
|
The hydraulic clutch does it have a mounting plate to suit the type 9 if so im intrested.
|
|
|
hearntd
|
| posted on 26/5/14 at 07:07 PM |
|
|
quote:
Originally posted by samjc
The hydraulic clutch does it have a mounting plate to suit the type 9 if so im intrested.
Hi, yer it has the adapter plate for the slave cylinder. I did try go to fit it to my setup (type 9 and duratec) but I have the raceline flywheel and
clutch setup, so the cylinderdid not reach the cover plate.
Hope that helps.
|
|
|
Mattie_maries
|
| posted on 26/5/14 at 07:52 PM |
|
|
Would you split the webbers off it?
|
|
|
hearntd
|
| posted on 26/5/14 at 08:53 PM |
|
|
quote:
Originally posted by Mattie_maries
Would you split the webbers off it?
I'd rather keep it all together for now but I'll keep it in mind.
|
|
|
robinhoodman
|
| posted on 30/5/14 at 09:48 PM |
|
|
pinto
Hi how much are you looking for the engine
|
|
|
serieslandy
|
| posted on 30/5/14 at 10:04 PM |
|
|
How much for the dura tech bell housing (#4) assuming you can post?
|
|
|
hearntd
|
| posted on 31/5/14 at 09:06 AM |
|
|
U2U sent to robinhoodman and serieslandy
|
|
|
