Barksavon
|
posted on 14/7/17 at 10:12 AM |
|
|
Pinto Head with Newman Cam
Pinto Cylinder Head ( not unleaded) fitted with a Newman fast road camshaft, Newman long pad cam followers with carbide inserts and Vernier timing
pulley. There is no wear visible on the lobes or followers. £200
Pinto Cylinder head for refurbishment. £20
Pinto Rocker covers (x2) £10 each
Pinto Rocker cover with filler spout removed from top and rewelded on front. Allows bonnet to fit properly (well it did on my Avon) £15 (very small
oil seapage through a pinhole in the weld, could easily be welded up but never really caused a problem)
Stainless steel inlet manifold for bike carbs on pinto head. Pipes are 38mm dia and are straight £60
Also got a distributor body which I blanked off and fitted to the pinto when I converted to megajolt. I'm sure there's other ways to do
this but it worked fine. £5
Quite a few other pinto bits, water pump, various pulleys, etc if you're after anything get in touch I might have it.
Prefer collection (of heavy items)from Ripley in Derbyshire
Thanks
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
ollycutts1982
|
posted on 17/7/17 at 08:49 AM |
|
|
Hi there, do you still have any of the above available?
|
|
Barksavon
|
posted on 17/7/17 at 10:02 AM |
|
|
Yes mate what you interested in?
|
|