striker1660
|
| posted on 21/1/18 at 02:29 PM |
|
|
clear out crossflow head, zetec mounts/manifold, etc
bare 1600gt crossflow cylinder head ideal for rebuild. £50
 
Zetec engine mounts - think there gbs ones they are unused as such as engine was taken out before car was roadworthy by previous owner.
£45 delivered
 
zetec mounts
Zetec manifold in good condition gbs straight out then down with heat wrapping . £100
side screens for seven a pair, they need a good clean. £40
5 3/4" chrome headlights pair with wiring good condition £50 delivered
Well for once i managed to upload some pictures until i tried new ones and failed.So the follwing are avaiable and i can send pcitures via an e
mail
ford crossflow followers for 1600 8 off
lucas alternator with 6 v ali pulley think its like the zetec belt offers
Locost seven with 1700 crossflow full spec on request.
fibreglass half doors in black pair one is flat the drivers side has elbow recess £70 inc. postage
any enquires please message.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
wowblaauw
|
| posted on 21/1/18 at 03:48 PM |
|
|
Hi, I'm interested in your GBS manifold. Can you let me know that the outside diameter of the connecting section is. Also, will you be able to
send via courier. If so, please et me know costs etc by U2U. Thanks, Craig
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in
sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"
|
|
|
wowblaauw
|
| posted on 21/1/18 at 03:49 PM |
|
|
...also the half fibreglass doors. Thanks, Craig
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in
sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"
|
|
|
