These are the rockers for the new front suspension, just got them back from anodising,
[img]http:// [/img]


bit of an improvement on the flat lumps of steel I had b4!

Wow!

Did you fabricate them yourself or had them made? Am always impressed by these things; simply beautifull!

Made the first ones which were really ugly, just to get the dimensions right, then drew the sides up in a free 2D CAD package & got them laser cut. The centres are standard suspension pivot bushes.

oooooooooooooooh they are the mutts nuts,Just cannot wait for the arrival of my chassis ,want to reduce the pile of expensive bits and to start the project.
Will go great with my taggart performance engineering chain drive ATB DIFF( If you want sexy bits have a look at their web site) the dogs wotsits cheers gary

[Edited on 21/3/07 by Bitten hero]

out of interest how much did they cost not including anodise ?

It all depends on numbers - the laser cutting is pretty cheap, but only if you're talking fairly large no.'s (say 30+), similarly with the anodising, much cheaper for large quantities.

yes, so how much did it cost then ?

Bitten,

Just had a peak at Taggarts website......... bear in mind I know nothing about everything, yes you're rite, that diff looks the dogs (and for that price they should do!!!). Pretty cool bit of kit