Blade bits:
Fireblade RRV loom, its complete and unmolested with all plugs - £25 (Sold)
RRV coil packs and HT leads £10 (Sold)
RRV airbox, you can have the standard airfilter FOC
£15 (Sold) 2 x Fireblade RRV CDi unit £20 each
Pinto parts:
Injection cylinder head with the correct inj ports. Unmolested and complete with cam, valves, springs followers etc. £100 (Sold subject to payment receipt)
Anodized blue vernier cam pulley for pinto engine - nice quality and i think unused or little used £Offers (Sold subject to payment receipt)
Janspeed pinto Turbo manifold (hens teeth) with I think bolt pattern for a T3 or equivalent. This is a very rare item! £Best offer before Sunday eve or it hits ebay (Sold subject to payment receipt)
205 block complete bottom end less sump. The bores show some signs of wear but its all complete with crank, piston, rods and oil pump and pick up. £30
Tin (steel) sump, needs looking at/refurbishing but ideal to 'cut down' to modify for a tight installation. £20
Running gear:
RS2000 complete English live axle with a 3.54 diff so the best ratio for a BEC. Inc halfshafts, drum brakes etc. Rare ratio to get now! £130
English axle rear brake conversion with calipers, disks etc. May need the weld on lugs to mount the calipers as I don't think they were in the set I got. I think they are cossie rear calipers (may be late escort?) The caliper mounts are available from someone on here, short track I think! £65
Edited to add:
I'm happy to consider swapping parts above for a good gas Mig welder Clarke 151 or equivalent sort of thing!
[Edited on 19/11/08 by carpmart]
Edited to mark sold items
[Edited on 20/11/08 by carpmart]
Turbo manifold, vernier and head all now sold subject to payment being received
[Edited on 20/11/08 by carpmart]
