I have 2 sets of zx9r carbs for sale.

First set ZX9R b1 carbs. As they came from the bike with backplate and trumpets VGC. £75 posted.

Image deleted by owner

Image deleted by owner


Second

ZX9R C carbs. These have a tps on the side. VGC. No back plate or trumpets but can be got from ebay for not alot. £85 posted.


Image deleted by owner

Image deleted by owner

Also i have a home made zetec inlet manifold which i made for the ZX9R C carbs. Not the neatest welding job but works. Looking to recover the cost of the plate so 25 quid posted. The plate cost me 20 quid plus post from shortrack. Would look good painted.

Image deleted by owner



Also i have a sierra collapsable collum bit. less the actual colum. This comes with bonnet pull, steering lock and key etc. Good condition but the key is very worn. With a new key will be perfect. Christ knows what this is worth?? £15 posted??
SOLD




All offered here before ebay gets them. Open to offers from fellow builders they need to go. You can collect from Stowmarket suffolk or i should be at the Diss meet next week.

Iv got a selection of smiths gauges aswell which ill put up later.

[Edited on 1/3/09 by Danozeman]

[Edited on 1/3/09 by Danozeman]

£15 posted for the collapsible column section? if so I'll have it

if you've got an electrically driven smiths style speedo i'd be interested

Hi fella, bit new to all this, but I've got an 1800 DOHC Zetec engine I'm building up. Will the manifold and carbs you've got for sale fit on?

If so, I'm definately interested. Based in Chelmsford, but always around the Colchester/Ipswich area. Drop me an e-mail on bigcharles82@hotmail.com or call/txt me on 07740-542280.

Look forward to hearing from you!

Charlie - may i suggest that you get the carbs with the TPS already fitted. This will make connecting to megajolt a lot easier.

i cant believe how you have fell in lucky.

I managed to find a back plate with trumpets quite easy for my ZZR1100's. I was told using the original bike trumpets is a good idea for smooth air flow. As said shouldnt cast you much.

Do i want to use a megajolt or megasquirt system with them? I'm currently watching both on ebay and looking at new prices, but unsure which one to go for.

Think my estmations for keeping this project low(er) budget and simple have gone out the window!

hi, what gauges have you got for sale?

thanks

stuart

u2u sent re. manifold

quote:

---

Originally posted by Charlie_Zetec
Do i want to use a megajolt or megasquirt system with them?

---