I have been giving this some thought of late, and toying with the idea of fitting a bike engine and alike, but after a bit more thought I have decided to see if anyone is interested in my buying my project.

I do not have time to finish this, so it either stays in my garage for the next few years, or someone gets a lot of bit to assemble.

So, chassis is an Autotune Gemini, a copy of the 1950's Falcon Bodied Elva.

The Chassis is complete, but I have cut the axle brackets off to fit new one (have not fitted these) the diff was pointing too high with the old brackets on.

The body is complete in red Gel coat. It has small doors, bonnet and a bonnet bulge in matching red gel coat.

The engine I was going to put in was an Alfa V6 mated to aford Type 9 box, which is included in the sale.

Also included are wheel, seats, some stainless down pipes, pair of R1 end cans, brand new clock set, just about everything that is needed to finish if you have the time.

If anyone is interested in this project, please pm me or e-mail.

I would like to get back the money I put into this project if I could, this is £2500

There are some pictures available, and any inspection is welcome Scarborough North Yorks.

http://www.ppcmag.co.uk/forum/topic.asp?TOPIC_ID=1415&whichpage=1

Have a BTTT for a great project - please someone buy this NOW so I cant

Preferably someone in Shropshire who will have a change in circumstances after 3 months and need to sell it on again.

In the mean time I have sent a U2U

Andrew

(Darkspeed)