For a host of reasons I have decided to sell up, I may come back to it in a couple of years, but can't hang on to it all.
If you are interested u2u me first come first served

all parts have been thoroughly cleaned and painted and appear as new seals, gaskets, bearings,grease etc as req. contact me and I'll give you full details I am open to offers.

There is

fuly re built 1.8 cvh has new gasket ,pressure, tested,new head bolts , water pump cam belt tensioner , cam belt polished alloy distributor blanking plate, powder coated rocker box shortened sump and pick up pipe, full new clutch, head rebuilt, pressure switches, custom inlet manifold gsxr 750 carbs with TPS alloy engine mounts vapour blasted, custom thermostat housing fitted to the rear of the head also fitted with type 9 5 speed box. Brand new alternator, recon starter motor It can be seen running at http://www.youtube.com/watch?v=NcVMVosgZ5w

Both front hubs are mint in red lead primer with brand new vented discs

Factory recon front calipers painted in heatproof red with new pads etc

rear diff 3.9 again with new oil seals and gaskets

push in drive shafts totally dismantled and chemically cleaned re greased new metal covers and rubber boots

brake back plates refurbed with new wheel cylinders and brand new drums

Hynes roadster pedals powder coated in silver with grip tape fitted

7inch chrome headlights

recon Mk2 escort rack

Sierra column

header tank

steering extension

contact me if you are interested ther may be other bits I hav nt listed so shout up and Ill see if I have got it. I have the V5 it is SORNed and I have the keys.

Kev

how much for the pedals and the steering column??
thanking you

private message via Haynes forum
andy

Oh Kev thats a proper shame mate, hope to see you back soon fella although I'm sure Paul the Sixth wouldn't mind you getting your fix helping him occasionally

Take care

Rich

Cheers Rich, Ill no doubt catch up with you when we get round to Pauls to pull his car to bitz

eccsmk you have a u2u

U2U sent re rear brakes

u2u sent ...thx

what are the front calipers? sierra ones for the normal vented discs?

Eyup guys, yes I'm still here and lurking in the background. Been tied up with various other projects (inca BBQ for 25 people last wknd - talk about hard work!) but I'm going to be back on track at the start of June... Just gotta get a week in Italy out of the way & I'll be firing on all cylinders. Would you be interested in helping me & kev rich? Gonna hammer the donor over a wknd

Hope you're all well & I can vouch for kevs handy work with everything he's re-con'd & re-built, it's all immaculate and works perfectly

You have U2U chears

Calipers ? are they Cortina ? if so how much ? will u2u