Board logo

Rover K series engine bits f/s and kinda free.
Danozeman - 17/6/09 at 09:53 AM

I have a K series 1.6 engine here which is going to the scrappy. if any one wants any thing let me know.

I think the blocks warped. 4 good conrods crank etc. The water pumps done 3000 miles max. good sump.

Tell me what u want and its yours for not alot plus post.

I have a good head aswell from a 1.4 which im after £50 for collected.

[Edited on 17/6/09 by Danozeman]


Danozeman - 17/6/09 at 11:53 AM

I have inlet and exhaust manifolds aswell.


Madinventions - 17/6/09 at 04:28 PM

Just on the off-chance that nobody wants any bits and you're going to take it to a scrappy, I've always fancied having a crack at an engine rebuild and it's probably as safe as it gets to do this on an engine that is already knackered! I wouldn't be trying to get it to run again or anything like that, I'd just like to get to know the mystical internals of an engine at first hand. I'm about 5 miles from Stowmarket so I can collect easily to save you the travelling to the scrappy.

Dunno - just an option. I'll leave it with you.

Cheers,
Ed.


Danozeman - 19/6/09 at 05:06 PM

Mate you could have had it but its already stripped down. Sorry.

I actually have 3 engines sitting at work and theyr all in bits otherwise id have given u one.


Madinventions - 22/6/09 at 12:52 PM

Hey no problems - "If you're cheeky enough to ask sometimes you're lucky enough to get" as my Grandad always used to say.

Cheers,
Ed.