FS: Some more bits and bobs
WestfieldSEI - 25/7/09 at 07:11 AM
Some odds and sods found around the garage, might be useful to someone out there.........
5 unused 2" diameter wheel centre caps in silver plastic. £5 inc P&P
Three (?) Ford wheel nuts for alloys M12*1.5 thread. £3 inc P&P
8 M12*1.5 wheel studs. 1.125" long. These came off Ford Cortina hubs. SOLD!
8 M12*1.5 wheel nuts. Chrome plated, a little rusty. Not sure what wheels these fit...
£5 inc P&P
14 (?) Used Taper washers 1" external diameter, 3/4" internal diameter.
£2 including P&P
1 pair of new track rod end covers suitable for SVA/IVA. £4 inc P&P
Drop me a pm....
[Edited on 25/7/09 by WestfieldSEI]SOLD!
[Edited on 27/7/09 by WestfieldSEI]
madrallysport - 25/7/09 at 07:22 AM
u2u sent, re wheel studs
WestfieldSEI - 25/7/09 at 07:57 AM
replied
matt_gsxr - 25/7/09 at 08:47 AM
FYI
Those 8 wheelnuts look like the ones I have on my Compomotive/Revolutions. Mine have flat washers on them.
If they are for Ford then the thread should be M12 1.5mm.
Matt
WestfieldSEI - 25/7/09 at 09:01 AM
Its too early in the morning! Just checked again and they are M12 * 1.5 thread pitch.
Ad has been edited... What a prat
WestfieldSEI - 27/7/09 at 07:25 AM
Wheel Studs now sold! Thanks.
WestfieldSEI - 5/9/09 at 04:22 PM
Bump!
prawnabie - 5/9/09 at 04:27 PM
u2u sent re wheel cappings
prawnabie - 5/9/09 at 04:28 PM
u2u sent re wheel cappings
WestfieldSEI - 6/9/09 at 07:58 PM
U2U replied to.