I have two sets (ie a set is 2 x8's and 2 x 10's) and one spare 8" aluminium 12 spoke OZ's.

They are 100mm PCD and the 8's are 120mm from inner rim to mounting face and the 10's are 135mm for the same dimension.

No use since blast and powder coat in gloss black.

Will need front of hub counterboring for a nut seat as have been centerlock use up till now. The peg holes do go all the way through the hub at the moment so this is not a big job.

£200 per set, odd one £50 all plus P+P

07903 474191, email or U2U