Board logo

1.8 Duratec bits
zetec mike - 25/8/09 at 10:22 PM

I've got a 1.8 Duratec in my workshop taking up space. Most parts except sump available if any one needs any bits ?

omega0684 - 26/8/09 at 08:31 AM

is it working order??

zetec mike - 26/8/09 at 10:31 PM

It was swapped as is was noisy on the top end. Thought I'd ask if anyone needed any bits.

goaty - 29/8/09 at 07:51 AM

need a flywheel if its not the dual mass type if poss please

zetec mike - 29/8/09 at 10:36 PM

I cant remember, I'll check it tomorrow and let u know.

goaty - 30/8/09 at 08:39 AM

thank you

Stuart_B - 30/8/09 at 10:13 AM

have you got the starter motor and ht leads and coil pack, if you have it and i will fit a 2.0?

and if it is a single mass flywheel and goaty does not have it, let me know.

thanks

stuart

Stuart_B - 30/8/09 at 04:47 PM

and the dipstick? please

stuart

flak monkey - 30/8/09 at 05:16 PM

quote:
Originally posted by Stuart_B
have you got the starter motor and ht leads and coil pack, if you have it and i will fit a 2.0?

and if it is a single mass flywheel and goaty does not have it, let me know.

thanks

stuart


Starter, coil pack and leads will all fit the 2.0

FASTdan - 1/9/09 at 10:24 AM

what car is it from? I need the tensioner as found on mk3 focus' that goes where the power steering pump would be on the mondeo motors (ie the top tensioner).

I'd also have the flywheel if single mass - but looks like I'm well beaten to that one lol.

zetec mike - 1/9/09 at 10:17 PM

Its from a Mondeo, flywheel is a dual mass, not sure what tensioners are on it. I'll have a look.