Hydraulic slave cylinder. CSC002 as fitted to all mondeos other than the V6. Will also fit in duratec bellhousing, but will need a custom spacer making as its slightly shorter than the proper one which should be used. Only suitable for clutches with curved fingers.

£25 posted

Mondeo 220mm clutch plate. With the smaller splined centre. 20mm x 17 splines. Not suitable for type 9.

£10

2 off clutch 220mm clutch covers. Both will fit zetec flywheels. Required clutch cover for zetec to type 9. Both brand new.

£15 each + post

Cheers,
David

U2U sent.....