Board logo

AGM 8pc Bodywork Kit - £370ono
phelpsa - 6/3/10 at 07:23 PM

White with black arches. Brand new, as removed from packaging, only selling as it turns out our chassis isn't quite Locost dimensions. Good chance for someone to take advantage of our mistake....

£470 new from AGM, looking for £370 ono as we desperately need the space back!

Based just of J14 of the M4 but do a fair amount of travelling to can probably sort some form of delivery.





[Edited on 6-3-10 by phelpsa]

arrow-engineering - 6/3/10 at 08:54 PM

ill give you a tenner for the curtains!

Hugh_ - 6/3/10 at 09:35 PM

What is the width of the scuttle (front and rear), and nosecone (rear and bottom edge)?

Thanks
Hugh

phelpsa - 6/3/10 at 10:35 PM

quote:
Originally posted by arrow-engineering
ill give you a tenner for the curtains!


Not a chance, they're antique and i've even got the matching pillow and duvet covers

Rear edge of scuttle: 1075mm
Front edge of scuttle (not including bonnet lip): 965mm
Rear edge of nosecone (not including bonnet lip): 650mm
Front upper edge: 550mm
Front bottom edge: 510mm

Hope that helps!

Krismc - 7/3/10 at 09:42 AM

Id have no testicles left if my bodywork was in the bedroom.

phelpsa - 7/3/10 at 11:35 AM

quote:
Originally posted by Krismc
Id have no testicles left if my bodywork was in the bedroom.


It's the annex, we call it the 'parts store'.

phelpsa - 8/3/10 at 11:01 PM

Quick bump stressing the ONO and how desperate we are for the space. Take advantage of our mistake!

alistairolsen - 12/3/10 at 10:16 AM

What height is the back edge of the nosecone from the top chassis rails?

phelpsa - 12/3/10 at 10:39 AM

quote:
Originally posted by alistairolsen
What height is the back edge of the nosecone from the top chassis rails?


I'll check for you when I get home tonight.

Adam

phelpsa - 14/3/10 at 04:56 PM

quote:
Originally posted by alistairolsen
What height is the back edge of the nosecone from the top chassis rails?


200mm

phelpsa - 14/3/10 at 04:58 PM

The length of the scuttle, bonnet and nose that sits on the chassis rail is 151cm.

phelpsa - 15/3/10 at 01:45 PM

Packed up and ready to go! Nobody looking for some bargain bodywork at the moment?

alistairolsen - 15/3/10 at 02:10 PM

I am but I really need the highline stuff and 200mm wont be high enough or Id have bitten your hand off!

phelpsa - 15/3/10 at 03:06 PM

quote:
Originally posted by alistairolsen
I am but I really need the highline stuff and 200mm wont be high enough or Id have bitten your hand off!


No worries, cheers for the interest!

phelpsa - 18/3/10 at 11:30 PM

A getting-close-to-the-weekend bump

phelpsa - 22/3/10 at 07:14 PM

phelpsa - 28/3/10 at 11:59 PM

Offers will definitely be listened to.

dlatch - 29/3/10 at 12:33 AM

will you split?

phelpsa - 29/3/10 at 12:29 PM

quote:
Originally posted by dlatch
will you split?


Dont really want to, but what do you need?

RK - 29/3/10 at 03:40 PM

It is top quality stuff from those people so they should really consider this.

dlatch - 29/3/10 at 04:49 PM

was after the rear panel if you were going to split.

where abouts in berks are you? i will be heading over reading way one evening this week.

phelpsa - 29/3/10 at 05:32 PM

I'm just off J14 of the M4. My dad works in Reading however. I'll have a chat with him tonight and see if we can start splitting.

dlatch - 29/3/10 at 05:56 PM

ok cool let me know