I thought I'd do a more complete post now that I've caught up on things as most of my other posts are out of date and show mostly stainless manifolds.

I now offer aluminium inlet manifolds for the fitment of bike carbs or bodies for most popular Ford (for now) engines. There are standard designs available but if you have specific requirements, tight engine bays etc then a manifold can be made to your exact dimensions using the below drawing:



For example here is a Pinto - ZX9R manifold I have just completed for a Tiger kit car:







In this link you will see a Zetec - R1 manifold complete with brake servo and vacuum take-offs:

http://xrtwo.speedcentral.co.uk/viewtopic.php?t=80431

Prices start at £120+pp depending on your requirements and the design.

I also offer fitting kits consisting of fluro-lined silicone hose - the proper fuel resistant stuff, well worth having - and 8 hose clips for £24 posted.





Email bboyfastdan@hotmail.com for more details.

Thanks

Dan

[Edited on 21/3/10 by FASTdan]

[Edited on 21/3/10 by FASTdan]

A few more examples:

Duratec - ZX9R:









Zetec - ZX9R:

bttt

I now have Vauxhall C20XE flanges and can therefore offer manifolds to suit this engine also.