Board logo

Stuff....a bit of a clear out
flak monkey - 29/3/10 at 09:13 PM

R6 throttle bodies. 32mm bore IIRC. No injectors, but come with everything else. £30+post

Type 9 bellhousing and release arm. Cleaned, but needs a paint. I good condition but has been kicking around the workshop for 18months. £10 collected or pay the courier (heavy!)

Sierra steering wheel - usual bus type wheel. May be useful for IVA? £5 + post

Sierra push in drive shafts. As removed from a sierra - so in need of a full clean, paint and new CV boots (stretchy ones are easiest!) sold!

Low pressure fuel filter. Cast aluminium hoising with mesh filter inside. Used it when running the pinto and served me well. Has 10mm hose tails, but 8mm will go on with a shove. £5+post

High pressure fuel filter. Std fitment for nissan 200sx. 8mm hose tails either end. £5+post

Caterham duratec roller throttle bodies. DTH. Suit tuned 2.3 for best idle characteristics, or track car where high idle is less a problem. £600 delivered

Probably more to come in the week

[Edited on 30/3/10 by flak monkey]

omega0684 - 29/3/10 at 09:18 PM

What you using instead of the roller bodies then Dave?

eddie99 - 29/3/10 at 09:23 PM

quote:
Originally posted by omega0684
What you using instead of the roller bodies then Dave?


Oh dear your behind times arent ya Alex Have a look at the build threads

boggle - 29/3/10 at 09:26 PM

any pics of the fuel filter (pinto)

flak monkey - 29/3/10 at 09:29 PM

I'll grab some snaps tomorrow evening

omega0684 - 29/3/10 at 09:30 PM

quote:
Originally posted by eddie99
quote:
Originally posted by omega0684
What you using instead of the roller bodies then Dave?


Oh dear your behind times arent ya Alex Have a look at the build threads


Don't have time to keep up with others builds, im too busy doing my own!

MikeR - 29/3/10 at 09:40 PM

I'm tempted with the drive shafts - don't fancy the postage on them tho. Anyone driving from Norfolk to the midlands in the next few months?

mangogrooveworkshop - 29/3/10 at 09:49 PM

quote:
Originally posted by MikeR
I'm tempted with the drive shafts - don't fancy the postage on them tho. Anyone driving from Norfolk to the midlands in the next few months?



parcel to go 6 quid deal

MikeR - 29/3/10 at 10:49 PM

if it really is 6 quid - its a deal.

Flak, can you confirm what the postage would be?

graememk - 29/3/10 at 10:56 PM

why are you selling the Tb flak, my mates got a set on a duratec running ok so it must be possible to do.

alexg1965 - 30/3/10 at 05:42 AM

U2U sent re. steering wheel

Stuart_B - 3/4/10 at 03:26 PM

hi david, have you still got teh r6 throttle boddies?

do you know the year bike they came off?

or a picture as well.

new plan with a mazda lump.lol

cheers

stuart