Hi Guys

I bought a nitro powered R/C plane a couple of years ago with the intention of rebuilding it and moving from electric to nitro. Needless to say it has sat gathering dust and I still fly electric! I will be selling it soon if anyone is interested?

it is the same as this one
http://www.hyperion.hk/preview/hp-mustang.htm

It is a hyperion P51D mustang with an OSF .40 engine partially plumbed in with filter and tank. It also has servos and control rods fitted for the retracts, rudder/tailwheel/ elevators and alierons. The RX is fitted to and it also comes with a Skyports 6 TX

Most of the wiring is fitted are there are two batteries, one for the retracts and one for the TX

It is a fibreglass fuselage with ply and skinned wings (1.2m wingspan). I have fuel, a starter and a box of spares - glowplugs, servo horns, props etc included in the sale.

Now for the bad points.

One of the wings is damaged on the corner and will need repairing and a bit of reskinning. There is no throttle servo so this will need to be fitted. The nose/engine cover is a bit bashed about and has been cut so you dont need to take the prop off to fit it.

I will put some photos up later.

I would like £100 for everything!

Cheers

Shaun

[Edited on 28/4/10 by prawnabie]

I just been told my a college who is an enthusiast it would be best to advertise on the BFMA web site?

Hope that helps you sell

Not really planes, but im spent a long time nobbing about with cars (elec and nitro. 12th, 10th and 8th scale)

I also have a nearly new raptor30 i was given as a christmas present (cast off from my cousin) which i keep meaning to learn to fly.


Daniel