Board logo

FS: Megasquirt
coozer - 15/6/10 at 10:55 AM

After this weekend going to Newark I will be removing the Megasquirt I installed over the winter.

I bought this off Phil at extraefi so comes fully assembled and con-coated, complete with wiring loom and the EDIS. It is the TPS version.

It is less than a year old and hardly done any miles. It is set up atm for my ST170 with VVT output. I will label up all the wires as I disassemble and have the cd and lead that came with it.

£300

Steve

[Edited on 15/6/10 by coozer]

austin man - 15/6/10 at 11:00 AM

so what ECU will you be running Steve ?

Ben_Copeland - 15/6/10 at 11:09 AM

Also you might want to let people know which megasquirt it is?

Ms1, Ms2 v3 etc etc.

coozer - 15/6/10 at 12:06 PM

I'm moving over to an Omex.

I'll check the version out when I get home tonight... Its an MS2 but not sure what the board is.

r1_pete - 15/6/10 at 12:11 PM

So tempted, but spent a fortune on the Bike and Car in the last couple of months....... resist!!!!!!!!!!!!

Ben_Copeland - 15/6/10 at 12:15 PM

Almost certainly a ms2 v3 then.

scutter - 15/6/10 at 03:25 PM

Steve, i'll be interested to see what your ST makes on the Omex, i'm just wrapping up a swap to a ST with an Omex 500.

ATB Dan.

loggyboy - 15/6/10 at 03:42 PM

May be interested, will you be at Newark to have a chat?

coozer - 15/6/10 at 05:46 PM

Yes, I'll be at Newark Sat & Sunday