Fuel tank from my Fisher Fury race car - aluminium with internal baffles, filler neck, hole for fuel sender (accepts Midget fuel sender or can be blanked off) and take off for breather/roll over valve (again, can be blanked off if not needed).

Filler neck is 50mm diameter, fuel outlet is 10mm diameter to allow high fuel flow. Overall size (mm) 145 x 320 x 662

There is a crack in one of the welds that has been sealed with chemical metal - it is currently fuel tight. The chemical metal could be removed and the seam re-welded, but I don't have the facilities to do this.

The tank has been sealed since removal, so is clean inside. Can be posted or picked up from Huddersfield or Pudsey.

I rather dumbly listed it on Ebay rather than posting it on here, but it's currently all of £20, so a bit of a bargain really:

Fisher Fury race car Fuel tank locost, kit car | eBay

Any Idear if it would fit a Locost