Mondeo clutch for a 1.8l zetec flywheel, 1”x23spline. Brand new and unused, came with a flywheel I bought. Made by Borg and Beck so a decent make, not pattern crap.
£30 posted.


mondeo clutch 2


Waterproof fabric roof with rear window and ¾ windows. Originally from my Tiger Super Six, it’s no use to me now since I fitted a full cage as it won’t fit over the top! In good condition with no rips or tears, it attaches with fabric poppers and would probably fit most standard sized 7-type cars with a bit of work.
£80 posted.
(Sorry for the crappy photo, it was raining and dark so I couldn't photograph it outside!)

roof 1

Pair of 2.25” springs, 11” long, standard from the front of a Tiger Super six, so 250lb I think. Reasonable chrome but a bit pitted in places, should polish up if you care about such things...
£25 posted.

springs

7” Chrome headlights with sealed beam units. Chrome, reasonable condition, light up when you connect electrickery to them. Not sure what else to say really!
£35 posted.
(No photos of these, but imagine big round chrome headlights and you won't go far wrong!)

R1 carbon exhaust, baffles removed so it's now a straight through can. Much more free flowing than standard, probably a lot noisier as well! I modified it but then never used it due to a change of plan.
£55 posted

r1 exhaust1


Collection welcome on all of the above.
Tom

U have U2U ref headlights.

Headlights sold to Mr O subject to payment.

just out of interest, what diameter is the clutch?
my car uses a sierra clutch on a vauxhall engine, but just wondering if this would be a worthy replacement in coming years (current clutch is new)

I think it's 220mm dia. Not sure it'd be any improvement on a sierra clutch though, if you want to upgrade have a look at the other clutch I have for sale in my other thread!

Tom

ah cheers. think mines 215mm?
wasn't so much an upgrade, but rather when mines needs to be replaced, i imagine sierra ones will be harder to find, mondeo ones should be easier to get hold of

that other one does look pretty sweet though! maybe i will look to lighten flywheels and upgrade the clutch in later years. first things first, get this car built and on the road...

[Edited on 10/1/12 by blakep82]

Sent a U2U.

Roof dimensions as follows (all a bit approx, it's a bugger of a thing to measure!)


roof dimensions