Board logo

13-inch Compomotive CXR, Lasers, Revolutions, Toyo R888
peterrosey - 12/1/12 at 09:17 AM

I'm trying to thin down my wheel collection to fund split rims so have the following up for grabs (will post remaining pics later). I'm at Autosports show on Saturday so can meet anyone there (failing that I'm based in Nottingham and work in Lincolnshire).

1. Compomotive CXR 6x13, Ford PCD, Caterham / Ford RWD offset, shod with Toyo R888 in GG compound. Tyres are 185/60-13 front, 205/60-13 rear. Tread is well above wear bars on rears and approaching wear bars on fronts. Wheels black and are undinked, apart from light overspray on the front ones. Alloy valves. £250 PROVISIONALLY SOLD
Wheels
Wheels




2. Laser alloys (four-spoke RS-style), bead blasted and sprayed gloss black. Shod with good slicks with several mm left on the wear divets. Alloy valves. Tyres are Avon slicks 6.0/21.0-13 (8810) Front, 7.0/22.00-13 (8811) Rear - roughly similar in size to 185/60 F / 205/60 R, slightly smaller so you'll have no clearance issues. Have used these twice and they're unbelievable. If you think R888s are good, slicks will blow your mind! Nearly made my passenger vomit when last used! The ultimate in track day grip. £150





3. Dymag style alloys in 6x13. Not sure what brand they are but they're a star pattern and very similar looking to Dymag six-spokes. Ford RWD PCD and offset. Shod with Avon wet tyres with lots of tread (size 160/530 R13, marked ACRO 02221M on sidewalls. Look close to 185/60-13 if I had to guess). They've been bead blasted and sprayed gloss black. Have a few dinks in the rim so not concours but look fine unless you get up close. £150




4. Revolution five-spokes 6 x 15-inch. Caterham / Ford PCD & offset (stamped with the numbers 16, 2, 19 on the rear, so I guess 19mm ET). Grey centres polished rims. Lacquer starting to lift, but in pretty good condition and could be polished up. Tyres are 195/50-15 Avon ZV1 in 82V rating. Seem ok with all having 6-7mm tread, but they're elderly and I personally would change them. There are five of these, so I've priced them far too cheap at £120

Will do a deal if you want the lot!

Many thanks Peter Rosenthal 07866 634086

Edited to add tyre sizes etc...
[Edited on 12/1/12 by peterrosey]

[Edited on 12/1/12 by peterrosey]


rost - 12/1/12 at 09:25 AM

Those CXRs are exactly what I'm looking for, but I'm affraid shipping to The Netherlands will just be too much
Any idea on how much the shipping will be?

[Edited on 12/1/12 by rost]


scootz - 12/1/12 at 09:34 AM

Hi Peter

Can I have the CXR wheels and tyres please?

U2U on it's way.

[Edited on 12/1/12 by scootz]


welderman - 12/1/12 at 10:07 AM

boo, second dibs on CXR please

[Edited on 12/1/12 by welderman]


aka Keith - 12/1/12 at 12:15 PM

U2U on the way?
Cheers
Craig


jeffw - 12/1/12 at 01:36 PM

quote:

3. Dymag style alloys in 6x13. Not sure what brand they are but they're a star pattern and very similar looking to Dymag six-spokes. Ford RWD PCD and offset. Shod with Avon wet tyres with lots of tread. They've been bead blasted and sprayed gloss black. Have a few dinks in the rim so not concours but look fine unless you get up close. £150



Interested in these but it depends on offset and what the tyres are (I presume CR28s?) and the tyre size.


theduck - 12/1/12 at 04:37 PM

oooh I really want Lasers with slicks for my car! Timing couldnt be worse though


rdodger - 12/1/12 at 04:38 PM

Just in case the first 2 drop out. 3rd dibs on the CXR's


adithorp - 12/1/12 at 04:42 PM

quote:
Originally posted by welderman
boo, second dibs on CXR please

[Edited on 12/1/12 by welderman]


When I saw I'd been beaten to them by Scootz, I was going to write a reply saying... "Boo, I'll just have to wait till you've sold them to Joe and try and get them off him"


scootz - 12/1/12 at 05:59 PM

Joe and I have long since had that conversation via U2U!!!


welderman - 12/1/12 at 06:28 PM

Yep we have and I'm working on it


scootz - 12/1/12 at 07:31 PM

All a touch academic now, as it seems I've been gazumped... they've apparently been sold to someone else on here


Jon Ison - 12/1/12 at 08:17 PM

Happy to take the slick shod wheels trouble is I'm on holiday and not back in UK till 18th, your call I would defo collect them next weekend ?


welderman - 12/1/12 at 08:27 PM

Not me either. Was looking forward to a Scootz bargin. Lol even predicting text on my phone puts the capital S in lol. Now that's funny


sebastiaan - 14/1/12 at 09:49 AM

Hi,

Really interested in the revolution wheels, depending on the real offset values. Could you measure the back spacing? Thanks!


peterrosey - 15/1/12 at 12:22 PM

REVOLUTION WHEELS NOW SOLD AND GONE THANKS. PETER R.


Jon Ison - 15/1/12 at 12:31 PM

Slick shod lasers, my post above ?


peterrosey - 15/1/12 at 01:51 PM

Still available if you want to come and get them on the 18 or in an evening. Key thing with me if I'm very short of time at the minute, so parceling wheels up or going to post office / waiting for couriers not possible. And if I was only after money I'd stick them on ebay... always best to ring me as can't always check emails and have very busy job...

[Edited on 15/1/12 by peterrosey]


Jon Ison - 15/1/12 at 11:30 PM

Will defo have them, will call you when I get back to UK, may be a tad expensive from here.


peterrosey - 16/1/12 at 01:29 PM

CXRs NOW SOLD.

Slicks sold to Jon pending payment.

Wets will be available in a few weeks as I've just realised I forgot to leave a set to roll the car on (split-rims I've ordered will be 5 weeks). If anyone needs them desperately I'll get some temporary wheels sorted.

Many thanks Peter R

[Edited on 16/1/12 by peterrosey]

[Edited on 16/1/12 by peterrosey]


theduck - 17/1/12 at 06:55 PM

If Jon doesn't go through with slicks let me know as am in a position to take them now.