Garage Clear Out!
coozer - 22/7/12 at 12:42 PM
Ok, I have some bits here if anyone is interested...
2004 ST170 engine, sump is crushed but good one supplied £250 - all the ancillaries are there as well if needed.
1.8 zetec engine £40 - condition unknown.
Type 9 gearbox with stick, bellhousing and the slider and donut £80.
Type 9 gearstick £10 - SOLD!
Sierra 3.62 open diff and push in shafts £100
GT3076 Turbo, T25/28 flange, brand new never used £250
Zetec tubular exhaust header, T25 flange, brand new, never used, £120
St170 dual mass flywheel £40
Sierra steering wheel and horn push £15
Mostly collection from my house in the far north of England.
Regards,
Steve
[Edited on 22/7/12 by coozer]
spiderman - 22/7/12 at 01:33 PM
I'll take the gearstick if you can post.
Many thanks.
Spider.
jossey - 22/7/12 at 05:32 PM
Steve I'll have the diff if you can wait till next week when I get paid. Cheers
Dave, north lincs
coozer - 22/7/12 at 05:43 PM
quote:
Originally posted by jossey
Steve I'll have the diff if you can wait till next week when I get paid. Cheers
Dave, north lincs
Yep, no problem.
Steve
coozer - 30/7/12 at 08:22 PM
BUMP! Nobody?
coozer - 3/8/12 at 07:38 PM
Anybody actually want any of these bits????
coozer - 21/8/12 at 10:19 AM
I can take most of this stuff to Donnington if anyone has any folding stuff..
hicost - 23/8/12 at 07:17 PM
Can I have some more detail on the turbo.
What makes it, did it come from eBay, a Chinese version?
Is it roller bearing or standard.
Thanks
james
coozer - 24/8/12 at 10:16 AM
quote:
Originally posted by hicost
Can I have some more detail on the turbo.
What makes it, did it come from eBay, a Chinese version?
Is it roller bearing or standard.
Thanks
james
Got it from the states off ebay. Brand new standard T28 exhaust housing, 0.7 AR compressor.
Open to offers..
scutter - 24/8/12 at 02:29 PM
Blooming typical, a spare st engine comes up when i've no cash
ATB Dan.
nogger827 - 28/8/12 at 10:32 PM
quote:
Originally posted by coozer
I can take most of this stuff to Donnington if anyone has any folding stuff..
hi mate would ou take £50 for the type 9 box and would ou still be able to get it to donnington?
coozer - 29/8/12 at 10:29 AM
1.8 and type 9 are sold....
coozer - 20/10/12 at 06:16 PM
Anyone want any of the rest before I go to the tip??
Still got...
ST engine £200..
ST flywheel
Diff n shafts
Steering wheel
Turbo
Exhaust header
House id for sale as well, £50K off the valuation...
[Edited on 22/10/12 by coozer]
scutter - 20/10/12 at 09:20 PM
I'd love the engine as a spare, but i've gotta save for xmas and your miles away.
ATB Dan.
loggyboy - 20/10/12 at 09:32 PM
how deep is the header? (perpendicular from face of mounting flange)
coozer - 20/10/12 at 10:03 PM
9" from the top of the loop to the flange.
loggyboy - 21/10/12 at 06:41 AM
Sorry I meant left to right, from the mounting with the head. Just wondered how much room they would need betweem engine and chassis rail.
[Edited on 21-10-12 by loggyboy]
coozer - 21/10/12 at 10:12 AM
quote:
Originally posted by loggyboy
Sorry I meant left to right, from the mounting with the head. Just wondered how much room they would need betweem engine and chassis rail.
[Edited on 21-10-12 by loggyboy]
Ok, its 150mm..
Benzo - 21/10/12 at 07:19 PM
If the engine doesnt sell, you can usuually get good money for the exhaust manifolds on focus owners website FFOC.
Also I would take the rocker cover, plastic centre cover and timing belt cover if you want to part with them?
Iain
b3ngy - 21/10/12 at 09:45 PM
Hi mate, I'll take the steering wheel if your giving it away. will need to be posted which I can obviously cover the costs
Ben
carlknight1982 - 21/10/12 at 11:20 PM
U2u re engineo
PSpirine - 22/10/12 at 07:05 AM
I may be interested in the ST170 engine (don't need the manifold if its desirable for other people). I'm not back in the country till
tomorrow (need to check my bank balance), so don't take it to the tip just yet
Pavs