T89 Designs are now offering a range of made to order front upright and suspension parts for Locosts, other Kits and Race cars.

I have already supplied a number of sets as well as proving out all designs on my own sprint car.

The majority of the parts are fittings and upgrades for the popular Rally Design Alloy upright and include:

- Top and Bottom Pins for Rose Joint/Rod End Wishbones
- Fitting Kits for Caterham Wingstays
- Conversion kits to replace Ford Track Rod ends with Rose Joints/Rod Ends
- Modified Length steering rack extensions

These can be supplied as basic parts, parts with fasteners or fully assembled upright kits.

Everything is made to order for your car and most kits contain bespoke designed parts at no extra cost. All designs are numbered and archived so replacement/copied parts can be re-supplied in future.

I also supply Lightweight High accuracy bush tubes, these remove virtually all of the 'play' from the inner wishbone bushes and save over half a kilo from the overall car weight.

I can quote for and supply anything else that you may need turning and I have a number of other parts currently ready to supply.

All parts are costed on an individual basis as every kit I have supplied is different so please dont hesitate to ask, I can give a decent idea of the cost once I have your requirements before I put together a full quote.

U2U me here or e-mail on callan@t89.co.uk

Example Parts:

there are more picture in my Photo Archive Here: http://www.locostbuilders.co.uk/photos.php?action=gal&user=Doctor Derek Doctors&folder=T89 Designs Parts

RD Upright with pins for top and bottom 5/8 Rod Ends and Caterham Wingstay Adaptors (on and off my Locost Sprint Car):


Description

Description

RD Uprights with Top Pins for 1/2 Rod Ends and a Wilwood Dynalite adaptor to fit a Westfield:


Description

Adaptors to fit Rod Ends to RD upright instead of Ford Track Rod Ends:


Description

Description

M12 Size Lightweight Bush Tubes:


Description

I now have full CAD models for the front uprights so design work can be done remotely for any bespoke parts.


Description

Description

Look great

Thanks to Doctor Derek Doctors, I now have some lovely shiny spacers on all round on my front uprights.


Description

I just need to sort out a couple of 1/2" bolts and the uprights can go on the car.

[Edited on 19/4/15 by ceebmoj]

Got pins last year from the doctor made to my own spec - great job with good comms throughout

Cheers for the good feedback, its always nice to here that people were pleased with the work.