Board logo

FS. 1 ton engine crane
mark chandler - 21/6/15 at 01:03 PM

Works fine, however when left standing it gradually empties itself, I never bothered sorting this out could just be an "O" ring on the pump plunger, the ram seal is fine.

It lifted out a v12 jag engine !

It's not one of the cheap ones that are braced, heavy duty box, £50 before it goes on eBay.

[img]https://picasaweb.google.com/102680160261680183167/2015062102?authuser=0&feat=directlink[/img]


Neilwilson - 21/6/15 at 07:17 PM

If you were local I would of had it mate. Slightly too large to fit in a post box....