Decided to change engine choice so have:
2.0 Blacktop (NGD code)
Shortened sump
Bosch green injectors
5 speed Type 9 Gearbox
Complete wiring loom
ECU
CVH Starter
Engine mounts
ST170 intake manifold lower for ITB's
Great setup - all you need is there. £450 - may separate if there is enough interest.
Also have:
Jackson racing inlet manifold to allow an Eaton M45 to bolt ontop - £150
Vortech V1 supercharger no end play, with brand new complete bearing and seal kit - £800
[Edited on 13/9/15 by Neilwilson]
[Edited on 13/9/15 by Neilwilson]
[Edited on 13/9/15 by Neilwilson]
What ECU?
It has TEEM written on, there maybe other numbers that I can check in the morning.
How much would you like for the sump? if you'll split it?
Already have provisional interest on the sump, if it's still here if/when splitting I will let you know.
Cheers
Now listed on the bay of thieves
http://www.ebay.co.uk/itm/-/262050352436?
have you still got the manifold
Yes i still have it mate
[Edited on 17/9/15 by Neilwilson]
Decided to change engine choice so have:
2.0 Blacktop (NGD code) with inlet & exhaust manifold approx 70k - £150
Shortened sump - £50
Bosch green injectors (803's) - £30
Type 9 Gearbox - £175
Complete wiring loom & ECU - £45
CVH Starter - £25
Zetec Engine mounts - SOLD
ST170 intake manifold lower for ITB's - £30
Jackson racing inlet manifold - SOLD
Vortech V1 supercharger no end play, with brand new complete bearing and seal kit - £750
Bump for the weekend
2.0 Blacktop (NGD code) with inlet & exhaust manifold approx 70k - provisionally SOLD
Shortened sump - provisionally SOLD
Bosch green injectors (803's) - £30
Type 9 Gearbox - provisionally SOLD
Complete wiring loom & ECU - provisionally SOLD
CVH Starter - £25
Zetec Engine mounts - SOLD
ST170 intake manifold lower for ITB's - £30
Jackson racing inlet manifold - SOLD
Vortech V1 supercharger no end play, with brand new complete bearing and seal kit - £700
[Edited on 4/10/15 by Neilwilson]
Ggrrrrrrr - would have had most of that off of you. Looking for engine, box, wiring etc etc
Let me know if for some reason sales fall through.
Thanks
Are the injectors high impedance and 14mm?
If so would like first dibs please.
Terry