Board logo

C20XE Parts
Lundy - 10/11/15 at 12:36 PM

Pair of Vernier pulley for a round tooth belt. The powder coat has worn off where the belt contacts the pulley so are back to aluminium in this area, some marks on the front where the powder coating is missing see photos, nothing that would affect their operation.

£100 -Collected from Essex - Maldon area or post at cost.


[/URL]


Westfield shallow sump with baffle plate and pick up pipe, oil pump with remote oil cooler plate. Sump is approximately 100mm deep.

£180 -Collected from Essex - Maldon area or post at cost.

[/URL]

[/URL]