Board logo

Omex 600 ecu / Type 9 Gearbox
mrwibble - 29/1/16 at 05:25 PM

Decided to split the most desirable parts of my project and sell separately the ECU & type 9 gearbox.

Omex 600 ECU - New/Unused in original omex box & includes Omex stickers (yay!) £500

Type 9 gearbox - from F reg Sierra 1800 L. mileage 80k. Last MOT scrappage paperwork available for proof of mileage. £225

These are both also for sale on Ebay.

Ford Sierra Type 9 5 Speed Gearbox only 80k Miles MOT & Scrappage Paperwork

Omex 600 4 Cyl Semi Sequential ECU New/Unused In Box LOWER PRICE

Will post out ECU, type 9 is collection only DY10 postcode.

[Edited on 29/1/16 by mrwibble]

Mark100 - 29/1/16 at 08:56 PM

wireing loom ?? was looking for an ecu that will do vvt on an st170 engine but could go blacktop easily

mrwibble - 29/1/16 at 09:03 PM

You'll need to buy a loom separate. This will do your vvt no problem though. You can pick up a new semi assembled loom on ebay £60.

J90rdn - 29/1/16 at 09:36 PM

Did you catch the mouse?

mrwibble - 29/1/16 at 09:39 PM

Haha. Yeah. I'll throw the little nipper in if you want box.

J90rdn - 29/1/16 at 09:46 PM

Would have jumped at the box few weeks ago. Picked up a scrapper for £100 and spent nearly £200 on new bearing, seals and gaskets. Ho hum. Someone will be getting a good deal.

kingster996 - 30/1/16 at 09:07 AM

quote:
Originally posted by Mark100
wireing loom ?? was looking for an ecu that will do vvt on an st170 engine but could go blacktop easily

Ones 710 does vvt so does the dta s60, s80. The 600 will suit a blacktop, but can't fully control the vvt on the st.

mrwibble - 30/1/16 at 09:25 AM

quote:
Originally posted by kingster996
quote:
Originally posted by Mark100
wireing loom ?? was looking for an ecu that will do vvt on an st170 engine but could go blacktop easily

Ones 710 does vvt so does the dta s60, s80. The 600 will suit a blacktop, but can't fully control the vvt on the st.


Excuse me if I misunderstood variable cam control as vvt? Full spec list http://omextechnology.co.uk/page75.html

[Edited on 30/1/16 by mrwibble]

mrwibble - 30/1/16 at 10:16 AM

Mark100. Seems like the pros & cons of vvt have been well debated here: http://www.locostbuilders.co.uk/viewthread.php?tid=165372

kingster996 - 30/1/16 at 12:55 PM

quote:
Originally posted by mrwibble
quote:
Originally posted by kingster996
quote:
Originally posted by Mark100
wireing loom ?? was looking for an ecu that will do vvt on an st170 engine but could go blacktop easily

Ones 710 does vvt so does the dta s60, s80. The 600 will suit a blacktop, but can't fully control the vvt on the st.


Excuse me if I misunderstood variable cam control as vvt? Full spec list http://omextechnology.co.uk/page75.html

[Edited on 30/1/16 by mrwibble]

It may do VVT but not the same way the st170 requires in order to fully utilise it. Well documented on many threads on here

mrwibble - 3/2/16 at 08:01 PM

Box now sold. Ecu still for sale looking for £475.

Cheers Ed

Jenko - 4/2/16 at 10:35 AM

quote:
Originally posted by kingster996
quote:
Originally posted by mrwibble
quote:
Originally posted by kingster996
quote:
Originally posted by Mark100
wireing loom ?? was looking for an ecu that will do vvt on an st170 engine but could go blacktop easily

Ones 710 does vvt so does the dta s60, s80. The 600 will suit a blacktop, but can't fully control the vvt on the st.


Excuse me if I misunderstood variable cam control as vvt? Full spec list http://omextechnology.co.uk/page75.html

[Edited on 30/1/16 by mrwibble]

It may do VVT but not the same way the st170 requires in order to fully utilise it. Well documented on many threads on here


It will turn the VVT / VCT on or off, but crucially allows you to turn it on then off again at higher rpm where its not needed. It does work though, I've done it on a puma engine using an OMEX600 with great results.

mrwibble - 17/2/16 at 01:43 PM

Hi,

Thanks for interest. Both ECU & Box are now sold.

Fury Rolling chassis is & zetec 2lt is available separately. Looking for £1150 to clear quickly, or else I will start to split it up and sell individually.

See here if you are http://locostbuilders.co.uk/viewthread.php?tid=202237

massive bargain, if you are interested in building a fury sportscar.

Thanks again

Ed