Board logo

Emerald K3 Ecu and Zetec Part Loom
SeaBass - 17/3/16 at 02:12 PM

Final clear out of my old Locost parts. I was keeping this safe to use for another project but family has taken over and no time to do anything.

This ran the Zetec in my Locost on throttle bodies and was used with the AEM wideband Lambda (see other listing) for adaptive target mapping. It worked superbly. The loom has been carefully removed and with the addition of connector to the injectors would simplify installation.

Comes complete with lead, software, manual and an old dedicate Laptop!

£400 securely posted to a UK address.






furryeggs - 17/3/16 at 04:20 PM

u2u sent.


Dick - 17/3/16 at 07:14 PM

u2u send


SeaBass - 18/3/16 at 09:43 AM

U2U's responded to.


SeaBass - 18/3/16 at 06:47 PM

SOLD