Hi All

I have a pile of bits to install a K series in a RWD application, as follows -


Caterham bellhousing, starter and adaptor (Type 9 not included!)

Description


Caterham lightweight flywheel (new)

Description


Description

Caterham engine mounts

Description

Caterham thermostat housing and u hose

Description

Caterham exhaust manifold and Harvey repackable silencer.

Description (the exhaust is loose and sat level not at the angle in the photo).

Standard flywheel and clutch (used).

Any other K series bits I have.

I'm looking to sell as one lot . Everything will be going on eBay later for £900 so open to serious offers close to this.

Thanks

Wyn

Bellhousing and starter now sold so splitting everything else.

Flywheel on ebay Caterham K Series Lightweight Flywheel - perfect for RWD K Series installation.

Seen your post re K series bits. I am interested only in the bellhousing + starter / adaptor and (if i read you post correctly) the standard flywheel to suit the same and possibly the clutch - I assume its serviceable? Can you give me a price for the B/H, starter / adaptor alone and BH etc + F/W + clutch as a package. This is a serious enquiry 'pre ebay'. I am unlikely to bid through that medium. Thanks

quote:

---

Originally posted by lsdweb
Bellhousing and starter now sold so splitting everything else.

---

All sold now ? David

I have the engine mounts left.

Ha ha, I'll try not to get too excited ;-)

Thanks for reply , where abouts in Wales are you... I'm in Glos

I've just realised I have the original flywheel and clutch left too.

Located in Llanelli - M4 Jct 48.