Board logo

FS: Fuel Rail and Injectors and other Zetec bits
kingster996 - 26/10/16 at 02:49 PM

I have a set of new unused injectors complete with fuel rail, regulator and wiring harness from a 2004 Blacktop Zetec (new crate engine).

This has inlet and return feeds so will be good for conversion to injection.

£35 delivered mainland UK

Also have an ST170 manifold that they should fit into (not actually checked though!) - have the fuel rail for that too (used but tatty)

There's a few more new Focus bits lying around like clutch (won't fit type 9 etc FWD only) and pressure plate, single throttle body, throttle pot, idle control valve - as well as a complete std sump (alloy and steel parts) that would be ideal for a chop job as it's obviously very clean being unused :-)

Will upload pics if anyone is interested.

chris - 26/10/16 at 11:03 PM

could i have the zetec fuel rail bits please and the sump and throttle bits and idle valve

[Edited on 26/10/16 by chris]

[Edited on 26/10/16 by chris]

kingster996 - 27/10/16 at 08:51 AM

OK, had a couple of U2U's about the various bits, so will reply and give 'dibs' based on time sent in order to be fair

kingster996 - 27/10/16 at 09:30 AM

OK - here's prices for the other bits etc

Full sump and throttle body (with pot) sold to Daveg

Chris has dibs on the Fuel Rail (with injectors, loom etc) and idle valve

Individual prices based on the lower end of what I can see on ebay - idle control valve £25 plus post.

ST 170 bits used from a 90k motor:

I have a full inlet with manifold and fuel rail (no injectors) and throttle body. Complete for £50 plus post or can split (manifold can be used for ITB conversion)

Also have an alternator £30, aircon pump £10, power steering pump £10 (all plus post)

Postage (mainland) should be £5 to £10 with insurance depending on size/weight

If I find any more bits, will add them here.

[Edited on 27/10/16 by kingster996]

[Edited on 27/10/16 by kingster996]

kingster996 - 27/10/16 at 07:49 PM

quote:
Originally posted by chris
could i have the zetec fuel rail bits please and the sump and throttle bits and idle valve

[Edited on 26/10/16 by chris]

[Edited on 26/10/16 by chris]


Chris - sent you a couple of U2U's - I have someone else who is after the fuel rail and injectors - so if I don't hear back soon, I'll pass them on to him.

Cheers
Chris

kingster996 - 27/10/16 at 09:54 PM

Fuel rail and injectors sold

[Edited on 28/10/16 by kingster996]