Board logo

Garage clearance (Caterham)
damdy-cash - 10/11/16 at 12:46 PM

Hi there, here are the last bits surplus after my Duratec conversion.

Prices are Pound w/o shipping. Stuff is located in Germany, experience from previous times are shipping costs are reasonable. Cheers Volker

Air box GRP Black (not perfect), these give very good results in case you need to get noide down for track days
Base plate 14,5x45cm,
Height 29cm, Length 46cm (base plate area), 48cm (induction area), width max 18cm
Base plate fits for Duratec Jenvey TB‘s, easy to be made for other TB’s
120,00

Alu Catch Tank 35,00

Aero fuel cap incl. Inlet and breather (suits a Caterham carburetor tank) 90,00

Caterham standard in- tank fuel pump 120,00

Wascher bottle incl. Pump and mounting 30,00

Caterham standard brake pads rear still in original packaging 50,00

Zetec coil incl. mounting, almost like new if cleaned proper 35,00

Mintex pads front MDB 1890 M1144, very short usage only, fits e.g.. HiSpec 4 piston caliper with 232mm disk 30,00

Pics are here

[Edited on 10/11/16 by damdy-cash]

damdy-cash - 12/11/16 at 02:57 PM

Filler cap sold, Cheers Volker

damdy-cash - 21/11/16 at 05:58 PM

Revised pricing

quote:
Originally posted by damdy-cash
Hi there, here are the last bits surplus after my Duratec conversion.

Prices are Pound w/o shipping. Stuff is located in Germany, experience from previous times are shipping costs are reasonable. Cheers Volker

Air box GRP Black (not perfect), these give very good results in case you need to get noide down for track days
Base plate 14,5x45cm,
Height 29cm, Length 46cm (base plate area), 48cm (induction area), width max 18cm
Base plate fits for Duratec Jenvey TB‘s, easy to be made for other TB’s
100,00

Alu Catch Tank 25,00

Aero fuel cap incl. Inlet and breather (suits a Caterham carburetor tank) sold

Caterham standard in- tank fuel pump 100,00

Wascher bottle incl. Pump and mounting 25,00

Caterham standard brake pads rear still in original packaging 40,00

Zetec coil incl. mounting, almost like new if cleaned proper 25,00

Mintex pads front MDB 1890 M1144, very short usage only, fits e.g.. HiSpec 4 piston caliper with 232mm disk sold

Pics are here

[Edited on 10/11/16 by damdy-cash]