Board logo

Stuart Taylor Motorsport Loco R1
foes - 7/7/17 at 08:20 AM

Decided it's time to let my Locost R1 go :-(
Unfortunately I just haven't got the time/space/funds to give it the love it deserves.
I built it myself and it passed SVA on 24/03/09. It's hardly been used since then, probably around 800 miles.
It's a Stuart Taylor live axle chassis, which was blasted and powdercoat gloss black. Most the other bits were purchased from them too.
The 2005 injection R1 engine/clocks were bought from Yorkshire engines with around 6k on it.

It has a decent spec including wildwood calipers, quaiffe Atb (3.54 ratio), bias bar, mounting for 6 point harness for driver (two 4 point harnesses currently fitted), full cage, mac#1 seats and aeroscreen, carbon front wings, longacre rear view mirror, paddle shift, power commander etc.

This would make an excellent track car.

Bad bits - The diff has started to leak oil so will require a overhaul. Currently no MOT but will definitely pass, if I'd got the time I'd get it done but it would mean trailering it to the mot station. I'll put a new battery on it as the one fitted is quite old now.

[/ URL]
[URL=http://s366.photobucket.com/user/foes81/media/svarightrear.jpg.html][/ URL]
[URL=http://s366.photobucket.com/user/foes81/media/Mobile%20Uploads/IMAG0464_1.jpg.html]




Price wise, not really sure I was thinking around £6750 but obviously am aware it needs the diff doing and an MOT.
Let me know if I'm a mile out on the price.

Thanks!


foes - 8/7/17 at 09:09 AM

Reduced to £6000 following some guidance on price, I am of course open to offers.

Cheers.


foes - 12/7/17 at 11:32 AM

Slight reduction again to £5500.


charliemouse - 12/7/17 at 10:27 PM

You have a u2u!


foes - 20/7/17 at 01:18 PM

Still for sale.
All u2u's now replied to. Just to add, not really open to offers at this price as in no rush to sell


welderman - 20/7/17 at 08:09 PM

Right up my street this. Going on holiday though and need to sell my car first 😤