Board logo

clearout - 7 and zetec items
femster87 - 13/5/18 at 12:59 PM

Hi all,

Since the seven is sold, I do not see myself ever building another one. So I have collected all the items I have let

1) Expansion tank - 100mm x 180mm
2) Fuel pump - brand new
3) 1.3 charade alternator - no pulley
4) 3 clutch release bearings
5) odds and sorts of silicone hoses - 32mm mostly - longs ones 22m
6) Type 9 gearbox mount
7) Zetec RWD starter motor - LR707 i believe. Worked well when removed. Engine sold
8)New copper brake line - 4.76mm x 0.71mm
9)Fuel level sender
10)Horn
11) Pair of good mirrors
12) brand new sierra caliper hand brake cable
13) laser cut battery tray - 80mm x 200mm

All above £35 collected - additional £12 if packaging and postage required



Item 2
Zetec Alternator, mounting brackets (need to find one more item so a bit of a delay) idler pullet and mounting bracket. £50 posted


Item 3
R1 power commander 3 - £85 posted

Item 4
Aluminium paddle shift - MNR's I believe might be wrong. Very well made kit - £100 posted



Item 5
Exhaust can - Not used on the road just for running engine in the workshop - £100 61mm inlet, 51 cm long can. 81cm overall lenght



[Edited on 13/5/18 by femster87]

[Edited on 13/5/18 by femster87]


wowblaauw - 13/5/18 at 02:25 PM

Hi, where about in South Yorkshire are you - have an inters in your bits and bobs

Thanks

Craig


femster87 - 13/5/18 at 02:42 PM

I am just outside worksop


nero1701 - 13/5/18 at 03:57 PM

Apologies..

Ive actually got most of that lot in boxes..

My Bad.

Sorry

[Edited on 13/5/18 by nero1701]


John G - 13/5/18 at 04:29 PM

Hi there, can I have the parts posted if they are still available? Regards, Jon. Will send u to u


femster87 - 13/5/18 at 06:05 PM

Parts bits sold pending payment


owelly - 13/5/18 at 11:35 PM

If the sale falls through, give me a nudge. I could do with the header tank!!


Stevie_P - 14/5/18 at 01:13 PM

Hi

Regarding the paddle shift. Does this fit the standard Sierra column.
Looks like it just clamps on and you use a standard push / pull cable?

Thanks
Steve


femster87 - 14/5/18 at 01:39 PM

Hi, this fits on the sierra column with a machined tube over the coulmn


Stevie_P - 14/5/18 at 01:50 PM

Thanks. I assume you haven't got the tube?


femster87 - 14/5/18 at 08:45 PM

Sorry sold with the car


tajgreidotu - 29/5/18 at 10:33 AM

Got the exhaust can from femster87. I can only have positive comments.

Item arrived fast and in great condition. Really happy with the sale


ttalps2000 - 30/5/18 at 03:42 PM

Still got the fuel pump?


femster87 - 30/5/18 at 08:51 PM

quote:
Originally posted by ttalps2000
Still got the fuel pump?


Sold as part of first package