With an extension in the near future, I've been instructed to have a clear out, apparently we need the space!
All located in Sutton Coldfield, West Mids - will post for cost. If needed, I frequent Lincoln, Coventry, Stoke, Derby and Birmingham.
I've posted the price i'd be comfortable with, but all offers are welcome and be considered!
Here we go:
1. Acewell 7652 Digidash - Used, but good condition - £100
Digidash
2. Alloy Header Tank - £20
Header1
3. RamAir Trumpet Socks - £20
Socks
4. Rad with Fan - £30
Rd2
5. Speedo and Rev Counter - SOLD
DIals
6. DanST Duratec Manifold, Heavy Duty Gasket, CBR ITBs with injectors (recently balanced), Trumpets and Pipercross Filter - Cost in excess of £500 -
£250
Inlet
ITBsTJD2
7. Doors - £50
Doors
8. Alloy Header Tank - £20
Header2
9. MS1 - SOLD
MS1
10. MS Simulator - £50
MSCont
11. 12v Clock - £5
Clock
12. VDO Temp - £10
Temp
13. VDO Fuel - £10
Fuel
14. Pipercross Filter - £10
Pipercross
15. Pinto Clutch - SOLD
PLate
16. 220m Clutch - £20
PLate2
17. Alloy Rad - £40
Radiator
[Edited on 24/7/18 by tomduffield13]
[Edited on 24/7/18 by tomduffield13]
[Edited on 25/7/18 by tomduffield13]
U2U sent re MS1
Is the speedo mechanical or electric?
What is the diameter?
quote:
Originally posted by Norfolkluegojnr
Is the speedo mechanical or electric?
What is the diameter?![]()
Thanks let me know, could be just what i'm after - mine current reads sod all!
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!![]()
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!![]()
Near as makes no difference 100mm, 103mm to be exact!
quote:
Originally posted by Norfolkluegojnr
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!![]()
Near as makes no difference 100mm, 103mm to be exact!
bugger! the hole is 90mm, with no room to increase. Thanks anyway![]()
I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks
quote:
Originally posted by snapper
I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
quote:
Originally posted by tomduffield13
quote:
Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!![]()
Near as makes no difference 100mm, 103mm to be exact!
bugger! the hole is 90mm, with no room to increase. Thanks anyway![]()
Ahh, that's the front measurement, the insert is smaller so it sits on the dash.
Picture with tape measure: https://ibb.co/k8ZVuT
Tom
Can i have the alloy rad #17 and the alloy header tank #8 please
quote:
Originally posted by motojohn
Can i have the alloy rad #17 and the alloy header tank #8 please
quote:
Originally posted by tomduffield13
quote:
Originally posted by snapper
I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks
I’ve had a first interest on the TBs, so you’re pencilled in if they don’t want them snapper.
I’ll send you the details tonight when I’m home from work.
8 (Header), 10 (Stim) and 17 (Rad) also sold.
Manifold and TBs are being collected on Saturday, If not, snapper is next in the queue.
Anyone for anymore before I list on Ebay? (Offers invited!)
quote:
Originally posted by tomduffield13
8 (Header), 10 (Stim) and 17 (Rad) also sold.
Manifold and TBs are being collected on Saturday, If not, snapper is next in the queue.
Anyone for anymore before I list on Ebay? (Offers invited!)
Thanks for your enquiry!
£21.10 through royal mail international, 5-7 days - so £41 all together.
Happy to proceed if you still want it, but it may be cheaper if I list it on ebay for you and use the international postage service through ebay...
has anyone got experience of this, where you ship it domestically and they forward on?
[Edited on 2/8/18 by tomduffield13]
u2u re Acewell
Update:
1. Acewell 7652 Digidash - Used, but good condition - SOLD
2. Alloy Header Tank - £20
3. RamAir Trumpet Socks - £20
4. Rad with Fan - £30
5. Speedo and Rev Counter - SOLD
6. DanST Duratec Manifold, Gasket, CBR ITBs with injectors, Trumpets and Pipercross Filter - SOLD
7. Doors - £50
8. Alloy Header Tank - SOLD
9. MS1 - SOLD
10. MS Simulator - SOLD
11. 12v Clock - £5
12. VDO Temp - £10
13. VDO Fuel - £10
14. Pipercross Filter - £10
15. Pinto Clutch - SOLD
16. 220m Clutch - £20
17. Alloy Rad - SOLD
Open to the cheekiest of offers, ask away.
quote:
Originally posted by tomduffield13
Thanks for your enquiry!
£21.10 through royal mail international, 5-7 days - so £41 all together.
Happy to proceed if you still want it, but it may be cheaper if I list it on ebay for you and use the international postage service through ebay... has anyone got experience of this, where you ship it domestically and they forward on?
[Edited on 2/8/18 by tomduffield13]