Hi,

As I have decided to break up my Robinhood 2B and sell it as parts so the bare chassis is up for grabs if anyone wants it. This is just the chassis frame, nothing else.

It's not quite ready yet as all the bits are still attached to it but give me a couple of weeks and I'll have it ready. Going to stick it in Gumtree too, but thought I'd offer it here first. It's not damaged and the lower seatbelt mounting has been well addressed over the original design. Might make a good basis for a car and is completely Sierra based. No bodywork or suspension is offered with this but is available at cost if required.

Will post pictures shortly.

U2U me if interested.

[Edited on 19/7/22 by Mr Whippy]

[Edited on 19/7/22 by Mr Whippy]

Just in case anyone gets excited, weren't you building a 2B?

The S7 was Triumph Dolomite based.

S7 was Dolomite, then Cortina and eventually Sierra based.

I would put it on the Robin Hood owners club forum if I were you.

quote:

---

Originally posted by indykid
Just in case anyone gets excited, weren't you building a 2B?

The S7 was Triumph Dolomite based.

---