Used for around 10 hours (6 race weekends) in a Ginetta G20.

These are as the link below, Ultralite 2 (UL2 FREAR) anodised black and are designed as a direct replacement for standard Ford Sierra rear hubs, ie, 2 lugs.

I've gone to a completely different rear disc set up and have replaced these with the same but in a radial mount pattern. Hispec weren't the easiest to deal with but to be fair we've never had a problem with their products. £200.

http://www.hispeccalipers.co.uk/ultralite-2.html

I also have a set of alloy hubs to take 273mm discs (not the standard 253mm) so slightly longer ears. Complete with bearings and seals and used for one race weekend. Also, a pair of 273mm discs to suit these, again used for 3 track sessions. Gone to a different set up so no longer required. £150 for the hubs, £40 for the discs.

Hi, I'm interested in this whole setup. Where are you based?
Thanks

Hi, I'm based in Chipstead, Surrey. For clarification and in response to another enquiry, these are without hand brake mechanisms.

Ok and thanks, I'll be giving these a miss - good luck with the sale

Hi.

Is there a way to fit handbrake with theses calipers.

Brad

No, the version with the handbrake option is completely different, this version is purely a caliper. Hispec do a separate handbrake only system if that's any help.

Thanks

Are these still available?

Yep, still available.

u2u sent!

Calipers sold, hubs and discs still available

Not wanting to take over the thread but if anyone else was after some calipers I also have a set. Feel free to PM me.