Got a spare pinto cylinder head sitting in the garage. Its had some light porting work done on it, following the guidelines in Des Hamills book.

Heads covered less than 500 miles. Had new cam bearings installed. All the valves were cleaned and relapped into the head.

Clean and tidy, could probably do with a coat of paint as I never bothered to paint this one.

Its got an FR22 cam in, but one of the lobes is knackered so its not really any good.

Had new kent cams followers installed. One was trashed when the cam failed, others are all perfect.

Valve stems all well within Mr Fords limits, guides are also spot on. Was fitted with low profile valve stem seals.

The cam pulley is not included. Neither is the thermostat housing as they have both been fitted to my current head.

A load of pics here:

http://gtslocost.locostsites.co.uk/builddiary_2006pages_april2006.htm



£40ono

Collection from Kings Lynn. No postage, sorry...

Cheers,
David

first dibs please David. I just need to contact the guy i'm building the car for though so may pass it on if he doesnt want it

Edited to say - bugger, just noticed where you are and no postage!! Will have to pass then!!

[Edited on 13/1/08 by Paul TigerB6]

i'd like it but dont know how to get it

quote:

---

Originally posted by jos
i'd like it but dont know how to get it

---

Sold to Jos